BuckNut 4 Report post Posted January 18, 2017 I've been wondering about getting a radio to know what is happening with the truck traffic on bush roads. Do any of you have one and how do they work ? It's obviously something that could save a life, especially on a narrow winding road like Athelstane. Also where do you get one and what is the cost ? Quote Share this post Link to post Share on other sites
tracker 61 Report post Posted January 18, 2017 I travel the Boreal lots so I use one. You can purchase from Lakehead Communications or call Radio World in Toronto where I purchased mine. Just remember that there are 3 haul channels (I think) so your options are to buy one that has to be programmed at the selling dealer or buy one you can adjust the frequencies yourself. Quote Tracker Team NOSA Homepage Born to Fish, Forced to Work <')(((((>{ Share this post Link to post Share on other sites
nwoFisherman 1 Report post Posted January 19, 2017 I bought a Motorola from CRC Communications and had them program it with all the haul frequencies, mine was new and around $500 i think. But you can get used ones from them that are a different brand for a lot less that work just as good. They just didn't have any used ones when I bought mine. Quote Share this post Link to post Share on other sites
eddylives 99 Report post Posted January 20, 2017 If your in no rush keep an eye on kijiji.......they show up there from time to time. 1 Quote Have no fear of perfection.....you will never reach it Share this post Link to post Share on other sites
Bobber Down 921 Report post Posted January 20, 2017 14 hours ago, eddylives said: If your in no rush keep an eye on kijiji.......they show up there from time to time. x2 Quote Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming - WOW - what a ride!!! Share this post Link to post Share on other sites
BuckNut 4 Report post Posted January 28, 2017 Thanks for all the advice. I picked up a used unit with the right channels so am good to go. Quote Share this post Link to post Share on other sites
nwoFisherman 1 Report post Posted January 31, 2017 Right on, did you buy it privately? Or from CRC? Or other radio shop? I'm looking for another used one now too for my other truck. Quote Share this post Link to post Share on other sites
BuckNut 4 Report post Posted January 31, 2017 Bought it privately, from a member of this site that saw my post. I was at CRC last week and they had no used ones at that time. Quote Share this post Link to post Share on other sites
robbo 8 Report post Posted November 18, 2017 Digging this topic back up cause nobody actually posted which channels are used around T. Bay area? Commonly, 5,6,7 I think but it would be nice to know for sure so I'm not running blind up the hauling roads. It's nice when an operation posts which channel to monitor at the start of a road but doesn't always happen. Safe driving still has to trump everything but does anyone have a definite guide to hauling channels or at least where to find out? I know drivers don't want to meet me on a hill or corner just as much as I don't want to meet them. Thanks for posting if you know. Quote going fishing is okay, going catching is great! Share this post Link to post Share on other sites
Adrian 132 Report post Posted November 19, 2017 Most of the roads have a sign stating what channel to monitor Quote Share this post Link to post Share on other sites
DLC 5 Report post Posted November 19, 2017 What type of radios are these; FRS/GMRS, CB, VHF? Daryl Quote Share this post Link to post Share on other sites
BuckNut 4 Report post Posted November 20, 2017 They are VHF/UHF . and the channels used here are 5,6 and 7 (which the radio has to be programmed for) . If the channel isn't posted you can set the radio to scan and try to sort out the right channel, but if they are hauling they usually post it. Quote Share this post Link to post Share on other sites
Hunter 5 Report post Posted November 21, 2017 Some company's use a private channel that you can't get with out their consent. Quote Share this post Link to post Share on other sites
Superiormobile 34 Report post Posted December 8, 2017 You will be good with 4,5,6,7. These are the so called public channels that they use on bush roads.If the logging companys are using there own channels, most of them will have it on scan to monitor 4,5,6 and 7. They will notify other trucks that you would be coming in or out. 1 150.290 The districts of Thunder Bay and Sudbury; part of the District of Algoma, south of the CN Rail line. 2 159.270 East of Nipigon, north of Wawa, Chapleau, Watershed and west of Matheson and Elk Lake. 3 163.980 The districts of Cochrane, Algoma, Sudbury, Timiskaming, Nipissing, Manitoulin and Parry Sound; part of the District of Kenora, north of Red Lake; Highway 17 extending east to Pembroke, north of Highway 60 and all of Algonquin Park. 4 165.180 The districts of Kenora, Thunder Bay and west of Wawa and Hearst, except 50 km radius of Red Lake. 5 170.250 Sudbury, South on Highway 69 to Parry Sound; Sudbury, east on Highway 17 to Pembroke; north of Highway 60, all of Algonquin Park and north of Highway 141. 6 170.310 The districts of Kenora, Rainy River and Thunder Bay. 7 171.000 The districts of Kenora, Rainy River, Thunder Bay and west of Highway 129, Chapleau and Hearst. 8 172.065 The districts of Kenora, Rainy River, Thunder Bay, Algoma and Cochrane; part of the District of Sudbury, north of Cartier and Capreol, except the 50 km radius of Red Lake. If you are heading in the bush around Dryden and Ear Falls Domtar uses Channel 9,88.99. 88 or 99 is the same frequency as channel six. I cant remeber which on it is. Most roads are ussually posted if someone hasent shot them up. Quote Share this post Link to post Share on other sites